Aspire K3 Quick Starter Kit

Description

Product information Aspire K3 Quick Start Kit

The starter set with decent battery power

The aspire K3 Quick Start Kit (starter set) is an e-cigarette for demanding users and ambitious "steamers" (the train is similar to that of a normal cigarette) at a very attractive price-performance ratio.

The aspire K3 e-cigarette is, so to speak, the big brother of the aspire K2 Quick Start Kit and uses the popular Nautilus BVC evaporator head, which has already achieved cult status among the so-called "Mouth-To-Lung" vapers.

Since the aspire K3 Quick Start Kit is very easy to use, this e-cigarette is also ideal for beginners. The handy size of the aspire K3 Quick Start Kit and the comparatively low weight make this e-cigarette very attractive as a second device for the vaper.

An aspire Nautilus BVC coil head with 1.8 Ω is installed as standard in the aspire K3 clearomizer. Another aspire Nautilus 1.8ohm BVC clearomizer is included as a replacement atomizer in the aspire K3 Quick Start Kit. If you want a little more steam, you can also use the aspire Nautilus BVC head with 1.6 ohm resistance (see accessories).

Note: All coil heads of the aspire K3 Quick Start Kit are wearing parts and should therefore be replaced regularly. As soon as the aspire K3 e-cigarette tastes burnt (cooky), because you may have forgotten to refill enough liquid or, despite a freshly charged battery, there is not enough steam, the aspire Nautilus BVC coil heads should be changed.

Important note: The battery has a so-called 510 connection! If you want to use an atomizer with an eGo connection (e.g. aspire Maxi BDC Clearomizer or aspire K1) on your aspire K3 Quick Start Kit, you will need the following adapter: Adapter 510 to eGo thread

Changing the evaporator and refilling liquid in the aspire K3 Quick Start Kit:

To do this, turn the aspire K3 tank upside down (mouthpiece points downwards). Unscrew the tank and fill it with liquid (tank volume: 2.0 ml). Make sure that no liquid runs into the air tube in the middle.

To change the aspire Nautilus BVC coil heads, unscrew the old one - it is best to use a paper handkerchief for this - and replace it with a new aspire Nautilus BVC atomizer head. With a new evaporator, it is advisable to put 2-3 drops of liquid in the upper opening so that the evaporator is wetted with enough liquid right from the start.

The aspire K3 battery of the aspire K3 Quick Start Kit has a large capacity of 1200 mAh and a permanently installed micro-USB socket. You can continue to use the aspire K3 e-cigarette while it is charging (pass-through function). For fast charging, we strongly recommend an additional 1000 mA (1A) USB mains plug (see accessories).

When the battery is fully charged (> 3.8 V), a blue and an orange light illuminate on the power button.
With a medium battery capacity (3.8 V - 3.5 V), only the blue light on the power button lights up.
If the voltage falls below 3.5 volts, the LED is orange and the aspire K 3 battery should be recharged.

Note: aspire Nautilus BVC coil heads, like all atomizer heads, are wear parts of an e-cigarette (DOA guarantee) and must be replaced regularly.

No guarantee or liability for improper use or incorrect use!ative.

Contents

1 x Aspire K3 Battery 1200mAh

1 x Aspire K3 Tank (2ml)

2 x Aspire 1.8Ω Nautilus BVC Coil Heads

1 x USB Charging Cable

1 x User Manual

1 x Warranty Card

Feature

1200mAh Battery Capacity

2ml Tank Capacity

Standard 510 Capacity